Call now to get tree assist just as tree removal, tree remove, bush fell, shrub trim, stump hauling and plenty of other across USA:


Click to call

Call +1 (855) 280-15-30






Repeat the process until you have undone all the nuts.

Mar 13, To replace the subframe bushings: Remove 4 bolt bolts holding subframe to diff, and 4 bolts+nuts holding trailing arms to the subframe. Remove the stock subframe bushing by making this setup on a bench vise: The sockets go in these slits.

Have a helper hold the subframe while you set everything up. BMW e30 rear subframe bushing removel and install. BMW e30 rear subframe bushing removel and install. Removal of the old bushings can be accomplished with an air chisel or sawzall but getting the new ones in is very difficult without the tools.

I sell the factory installation tools to my parts customers at just over cost price for the E28/E24/E23 tools is, the E30 tool set runsand the E36/E32/E34 set isAug 01, When removing the rear subframe on an E30, there is always a possibility that either of the two old bushings will be oxidized and therefore seized/stuck in the body.

The OE subframe bushings are made up of an aluminum sleeve with a thick rubber coating around it. The aluminum sleeve protrudes at the top of the bushing and seats into the body during. e30 Subframe bushing puller tool.AM.

Sub-Frame bushing puller for E30s and Z3s. I've used this tool to pull approximately 25 sets of bushings so this is a proven design that makes pulling sub-frame bushings an easy job. Price isshipped and the item ships from North Carolina.

Hello Guest!

Jan 27, They have been around for a while. Pbfut has given directions on how to make a subframe and trailing arm bushing removal tool for less than the cost of shipping your tool around (around 7 or at least that's what I spent on supplies). You also need adeposit.:eeps: I don't know guy. Aug 13, Was really surprised how well this ended up working.

1 - 8" steel"L" bar, 2 - small steel wall brackets, and some threaded rod/bolts, etc to hold it all together. Just use a"C" clamp to hold the 2 brackets tight to the bushing/subframe as you start to tighten the bolt on the threaded rod, and with a little heat on the subframe, both bushings came out within minutes.

Replacing the rear subframe bushings on an E30 Replacing the rear subframe bushings on an E Well. it was time to replace the subframe bushings on my eta. I could tell because I would often get a loud clunk BMW E30 Subframe Bushing Tool - YouTube May 28, This video shows the BMW E30 Subframe Bushing Tool being used to remove. BMW E30 SUBFRAME bushing removal & installation tool 3 series - EUR 80, FOR SALE! Subframe Bushing Removal / Installation Tool for E Works with the following